What Follow-Me products do I need?
Indicate the specific needs for your show below:
The following options are recommended for your show
Option 1
Recommended
Follow-Me TWO license
The Follow-Me TWO license allows you to follow up to two performers with a maximum of 12 fixtures. It supports Art-Net and allows you to follow performers in full 3D. PSN and TraXYZ extension are excluded from this license.
Follow-Me Camera Set
The Follow-Me Camera Set includes the Follow-Me Camera Box, a Marshall camera and 3 lenses. This is used to provide a camera image into the Follow-Me software for remote follow spot control. The Follow-Me Camera Box is a sturdy case that allows you to keep your camera in the truss. The camera can be easily mounted on top of the camera box, with a 360° ball joint head.
Follow-Me Rack Server
The Follow-Me Rackserver allows you to easily integrate Follow-Me in your server rack. The Follow-Me rackserver is a robust and secure solution that includes a Mac mini with Follow-Me 3D installed on it. A Follow-Me serial adapter and all connectors required for Follow-Me are also integrated, incl. HDMI and SDI to receive the camera feed into Follow-Me and Ethercon to integrate Follow-Me in your lighting infrastructure.
The enclosure is only 1U tall and 18 inches deep, making it perfect for use in a wide range of popular racks and rackcases. A convenient front panel power button turns the Mac Mini on and off. It also includes temperature control fans to prevent the Mac Mini from overheating. A USB 3.0 port on the front of the rackserver enables connection of keyboard and mouse to the Mac Mini. The rack enclosure provides strategic airflow cooling for the included Mac Mini.
Connect the rack server to a monitor and a PoE switch and you’re good to go!
Follow-Me Mouse Console
The Follow-Me Mouse console is a high quality piece of hardware with which one operator can follow one person. It is an ergonomic mouse controller for prolonged shows with proportional control for accurate tracking.
It has two buttons and two encoders that can be assigned to any mapping function within the Follow-Me software. The console has a target selection ID display to identify which target the controller is connected to.
The casing of the Follow-Me mouse console is made from robust metal: especially made durable for those rock and roll shows. The mouse feels nice to control, so that operators are not strained during prolonged shows. Together with the fader console, it is a perfect combination for operating the Follow-Me software.
Follow-Me Fader Console
The Follow-Me Fader Console adds an extra 4 faders, 4 encoders and 4 switches to the Follow-Me Mouse Console. It is a high quality piece of hardware that one Follow-Me operator can use to utilise any mapping in the Follow-Me software. After connecting a fader console to the Follow-Me software, all buttons and faders on the Fader Console can be customized to be attached to any mapping in the software.
The console has a Neutrik XLR-4 output to link to the mouse console. An XLR cable is included with the fader console. There is also a Neutrik XLR-3 available for an optional LED desk light. The Follow-Me Fader Console supports the industry standard Littlite X-LED Series and Littlite XR-LED Series.
To be supplied by customer:
One or two monitors
PoE switch
Cables (SDI, Powercon, Ethernet & XLR5)
Information
This set-up includes the Follow-Me Rack Server, which immediately provides the full Follow-Me solution. The Rack Server is only 1U tall and 18 inches deep, making it perfect for use in a wide range of popular racks and rackcases. It includes a Mac Mini with the latest Follow-Me software installed on it. Attach the Follow-Me Camera Set and the Follow-Me consoles, and you're good to start following performers with the Follow-Me TWO license.
Upgrade options
The Follow-Me TWO license is limited to following two performers using a maximum of twelve fixtures. An extra console set can be added to the above set to follow another performer. At all times, the license can be upgraded to a Follow-Me SIX license, that allows you to follow up to 6 performers and use an unlimited amount of fixtures. Additional consoles are then required to be able to follow more performers.
Interested in one of these options?
Option 3
Recommended
Follow-Me TWO license
The Follow-Me TWO license allows you to follow up to two performers with a maximum of 12 fixtures. It supports Art-Net and allows you to follow performers in full 3D. PSN and TraXYZ extension are excluded from this license.
Follow-Me Camera Set
The Follow-Me Camera Set includes the Follow-Me Camera Box, a Marshall camera and 3 lenses. This is used to provide a camera image into the Follow-Me software for remote follow spot control. The Follow-Me Camera Box is a sturdy case that allows you to keep your camera in the truss. The camera can be easily mounted on top of the camera box, with a 360° ball joint head.
Follow-Me Rack Server
The Follow-Me Rackserver allows you to easily integrate Follow-Me in your server rack. The Follow-Me rackserver is a robust and secure solution that includes a Mac mini with Follow-Me 3D installed on it. A Follow-Me serial adapter and all connectors required for Follow-Me are also integrated, incl. HDMI and SDI to receive the camera feed into Follow-Me and Ethercon to integrate Follow-Me in your lighting infrastructure.
The enclosure is only 1U tall and 18 inches deep, making it perfect for use in a wide range of popular racks and rackcases. A convenient front panel power button turns the Mac Mini on and off. It also includes temperature control fans to prevent the Mac Mini from overheating. A USB 3.0 port on the front of the rackserver enables connection of keyboard and mouse to the Mac Mini. The rack enclosure provides strategic airflow cooling for the included Mac Mini.
Connect the rack server to a monitor and a PoE switch and you’re good to go!
Follow-Me Mouse Console
The Follow-Me Mouse console is a high quality piece of hardware with which one operator can follow one person. It is an ergonomic mouse controller for prolonged shows with proportional control for accurate tracking.
It has two buttons and two encoders that can be assigned to any mapping function within the Follow-Me software. The console has a target selection ID display to identify which target the controller is connected to.
The casing of the Follow-Me mouse console is made from robust metal: especially made durable for those rock and roll shows. The mouse feels nice to control, so that operators are not strained during prolonged shows. Together with the fader console, it is a perfect combination for operating the Follow-Me software.
Follow-Me Fader Console
The Follow-Me Fader Console adds an extra 4 faders, 4 encoders and 4 switches to the Follow-Me Mouse Console. It is a high quality piece of hardware that one Follow-Me operator can use to utilise any mapping in the Follow-Me software. After connecting a fader console to the Follow-Me software, all buttons and faders on the Fader Console can be customized to be attached to any mapping in the software.
The console has a Neutrik XLR-4 output to link to the mouse console. An XLR cable is included with the fader console. There is also a Neutrik XLR-3 available for an optional LED desk light. The Follow-Me Fader Console supports the industry standard Littlite X-LED Series and Littlite XR-LED Series.
To be supplied by customer:
One or two monitors
PoE switch
Cables (SDI, Powercon, Ethernet & XLR5)
Information
This set-up includes the Follow-Me Rack Server, which immediately provides the full Follow-Me solution. The Rack Server is only 1U tall and 18 inches deep, making it perfect for use in a wide range of popular racks and rackcases. It includes a Mac Mini with the latest Follow-Me software installed on it. Attach the Follow-Me Camera Set and the Follow-Me consoles, and you're good to start following performers with the Follow-Me TWO license.
Upgrade options
The Follow-Me TWO license is limited to following two performers using a maximum of twelve fixtures. At all times, the license can be upgraded to a Follow-Me SIX license, that allows you to follow up to 6 performers and use an unlimited amount of fixtures. Additional consoles are then required to be able to follow more performers.
Interested in one of these options?
The following options are recommended for your show
Option 2
Recommended
Follow-Me SIX license
The Follow-Me SIX license allows you to follow six performers with an unlimited amount of fixtures. It supports Art-Net and allows you to follow performers in full 3D. This license provides also access to the PosiStageNet protocol and the ability to extend with TraXYZ autotracking.
Follow-Me Camera Set
The Follow-Me Camera Set includes the Follow-Me Camera Box, a Marshall camera and 3 lenses. This is used to provide a camera image into the Follow-Me software for remote follow spot control. The Follow-Me Camera Box is a sturdy case that allows you to keep your camera in the truss. The camera can be easily mounted on top of the camera box, with a 360° ball joint head.
Follow-Me Rack Server
The Follow-Me Rackserver allows you to easily integrate Follow-Me in your server rack. The Follow-Me rackserver is a robust and secure solution that includes a Mac mini with Follow-Me 3D installed on it. A Follow-Me serial adapter and all connectors required for Follow-Me are also integrated, incl. HDMI and SDI to receive the camera feed into Follow-Me and Ethercon to integrate Follow-Me in your lighting infrastructure.
The enclosure is only 1U tall and 18 inches deep, making it perfect for use in a wide range of popular racks and rackcases. A convenient front panel power button turns the Mac Mini on and off. It also includes temperature control fans to prevent the Mac Mini from overheating. A USB 3.0 port on the front of the rackserver enables connection of keyboard and mouse to the Mac Mini. The rack enclosure provides strategic airflow cooling for the included Mac Mini.
Connect the rack server to a monitor and a PoE switch and you’re good to go!
Follow-Me Mouse Console
The Follow-Me Mouse console is a high quality piece of hardware with which one operator can follow one person. It is an ergonomic mouse controller for prolonged shows with proportional control for accurate tracking.
It has two buttons and two encoders that can be assigned to any mapping function within the Follow-Me software. The console has a target selection ID display to identify which target the controller is connected to.
The casing of the Follow-Me mouse console is made from robust metal: especially made durable for those rock and roll shows. The mouse feels nice to control, so that operators are not strained during prolonged shows. Together with the fader console, it is a perfect combination for operating the Follow-Me software.
Follow-Me Fader Console
The Follow-Me Fader Console adds an extra 4 faders, 4 encoders and 4 switches to the Follow-Me Mouse Console. It is a high quality piece of hardware that one Follow-Me operator can use to utilise any mapping in the Follow-Me software. After connecting a fader console to the Follow-Me software, all buttons and faders on the Fader Console can be customized to be attached to any mapping in the software.
The console has a Neutrik XLR-4 output to link to the mouse console. An XLR cable is included with the fader console. There is also a Neutrik XLR-3 available for an optional LED desk light. The Follow-Me Fader Console supports the industry standard Littlite X-LED Series and Littlite XR-LED Series.
To be supplied by customer:
One or two monitors
PoE switch
Network cables
SDI cable
Information
With this package, you are able to follow a single performer with an unlimited amount of fixtures. This set-up includes the Follow-Me Rack Server, which immediately provides the full Follow-Me solution. The Rack Server is only 1U tall and 18 inches deep, making it perfect for use in a wide range of popular racks and rackcases. It includes a Mac Mini with the latest Follow-Me software installed on it.
Attach the Follow-Me Camera Set and the Follow-Me consoles, and you're good to start following performers with the Follow-Me SIX license. This license also supports automation integration over PSN and be extended to automatically track performers using the Follow-Me Track-iT system.
Upgrade options
This package is a great long-term solution, as it can be upgraded at all times to follow more performers.
As the SIX license already supports up to six performers, all that's needed is extra Follow-Me mouse consoles. If additional parameter control is desired then extra Follow-Me Fader consoles are recommended. Follow-Me consoles will instantly be recognized over Ethernet cable in the Follow-Me software, after which you can follow those extra performers at your show.
Interested in one of these options?
The following options are recommended for your show
Option 4
Recommended
Follow-Me SIX license
The Follow-Me SIX license allows you to follow six performers with an unlimited amount of fixtures. It supports Art-Net and allows you to follow performers in full 3D. This license provides also access to the PosiStageNet protocol and the ability to extend with TraXYZ autotracking.
Follow-Me Camera Set
The Follow-Me Camera Set includes the Follow-Me Camera Box, a Marshall camera and 3 lenses. This is used to provide a camera image into the Follow-Me software for remote follow spot control. The Follow-Me Camera Box is a sturdy case that allows you to keep your camera in the truss. The camera can be easily mounted on top of the camera box, with a 360° ball joint head.
Follow-Me Rack Server
The Follow-Me Rackserver allows you to easily integrate Follow-Me in your server rack. The Follow-Me rackserver is a robust and secure solution that includes a Mac mini with Follow-Me 3D installed on it. A Follow-Me serial adapter and all connectors required for Follow-Me are also integrated, incl. HDMI and SDI to receive the camera feed into Follow-Me and Ethercon to integrate Follow-Me in your lighting infrastructure.
The enclosure is only 1U tall and 18 inches deep, making it perfect for use in a wide range of popular racks and rackcases. A convenient front panel power button turns the Mac Mini on and off. It also includes temperature control fans to prevent the Mac Mini from overheating. A USB 3.0 port on the front of the rackserver enables connection of keyboard and mouse to the Mac Mini. The rack enclosure provides strategic airflow cooling for the included Mac Mini.
Connect the rack server to a monitor and a PoE switch and you’re good to go!
Follow-Me Mouse Console
The Follow-Me Mouse console is a high quality piece of hardware with which one operator can follow one person. It is an ergonomic mouse controller for prolonged shows with proportional control for accurate tracking.
It has two buttons and two encoders that can be assigned to any mapping function within the Follow-Me software. The console has a target selection ID display to identify which target the controller is connected to.
The casing of the Follow-Me mouse console is made from robust metal: especially made durable for those rock and roll shows. The mouse feels nice to control, so that operators are not strained during prolonged shows. Together with the fader console, it is a perfect combination for operating the Follow-Me software.
Follow-Me Fader Console
The Follow-Me Fader Console adds an extra 4 faders, 4 encoders and 4 switches to the Follow-Me Mouse Console. It is a high quality piece of hardware that one Follow-Me operator can use to utilise any mapping in the Follow-Me software. After connecting a fader console to the Follow-Me software, all buttons and faders on the Fader Console can be customized to be attached to any mapping in the software.
The console has a Neutrik XLR-4 output to link to the mouse console. An XLR cable is included with the fader console. There is also a Neutrik XLR-3 available for an optional LED desk light. The Follow-Me Fader Console supports the industry standard Littlite X-LED Series and Littlite XR-LED Series.
To be supplied by customer:
One or two monitors
PoE switch
Cables (SDI, Powercon, Ethernet & XLR5)
Information
With this package, you are able to follow two performers with an unlimited amount of fixtures. This set-up includes the Follow-Me Rack Server, which immediately provides the full Follow-Me solution. The Rack Server is only 1U tall and 18 inches deep, making it perfect for use in a wide range of popular racks and rackcases. It includes a Mac Mini with the latest Follow-Me software installed on it.
Attach the Follow-Me Camera Set and the Follow-Me consoles, and you're good to start following performers with the Follow-Me SIX license. This license also supports automation integration over PSN and be extended to automatically track performers using the Follow-Me Track-iT system.
Upgrade options
This package is a great long-term solution, as it can be upgraded at all times to follow more performers. As the SIX license already supports up to six performers, all that's needed is extra Follow-Me mouse consoles. If additional parameter control is desired then extra Follow-Me Fader consoles are recommended. Follow-Me consoles will instantly be recognized over Ethernet cable in the Follow-Me software, after which you can follow those extra performers at your show.
Interested in one of these options?
The following options are recommended for your show
Option 5
Recommended
Follow-Me TWO license
The Follow-Me SIX license allows you to follow six performers with an unlimited amount of fixtures. It supports Art-Net and allows you to follow performers in full 3D. This license provides also access to the PosiStageNet protocol and the ability to extend with TraXYZ autotracking.
Follow-Me Camera Set
The Follow-Me Camera Set includes the Follow-Me Camera Box, a Marshall camera and 3 lenses. This is used to provide a camera image into the Follow-Me software for remote follow spot control. The Follow-Me Camera Box is a sturdy case that allows you to keep your camera in the truss. The camera can be easily mounted on top of the camera box, with a 360° ball joint head.
Follow-Me Rack Server
The Follow-Me Rackserver allows you to easily integrate Follow-Me in your server rack. The Follow-Me rackserver is a robust and secure solution that includes a Mac mini with Follow-Me 3D installed on it. A Follow-Me serial adapter and all connectors required for Follow-Me are also integrated, incl. HDMI and SDI to receive the camera feed into Follow-Me and Ethercon to integrate Follow-Me in your lighting infrastructure.
The enclosure is only 1U tall and 18 inches deep, making it perfect for use in a wide range of popular racks and rackcases. A convenient front panel power button turns the Mac Mini on and off. It also includes temperature control fans to prevent the Mac Mini from overheating. A USB 3.0 port on the front of the rackserver enables connection of keyboard and mouse to the Mac Mini. The rack enclosure provides strategic airflow cooling for the included Mac Mini.
Connect the rack server to a monitor and a PoE switch and you’re good to go!
Follow-Me Mouse Console
The Follow-Me Mouse console is a high quality piece of hardware with which one operator can follow one person. It is an ergonomic mouse controller for prolonged shows with proportional control for accurate tracking.
It has two buttons and two encoders that can be assigned to any mapping function within the Follow-Me software. The console has a target selection ID display to identify which target the controller is connected to.
The casing of the Follow-Me mouse console is made from robust metal: especially made durable for those rock and roll shows. The mouse feels nice to control, so that operators are not strained during prolonged shows. Together with the fader console, it is a perfect combination for operating the Follow-Me software.
Follow-Me Fader Console
The Follow-Me Fader Console adds an extra 4 faders, 4 encoders and 4 switches to the Follow-Me Mouse Console. It is a high quality piece of hardware that one Follow-Me operator can use to utilise any mapping in the Follow-Me software. After connecting a fader console to the Follow-Me software, all buttons and faders on the Fader Console can be customized to be attached to any mapping in the software.
The console has a Neutrik XLR-4 output to link to the mouse console. An XLR cable is included with the fader console. There is also a Neutrik XLR-3 available for an optional LED desk light. The Follow-Me Fader Console supports the industry standard Littlite X-LED Series and Littlite XR-LED Series.
To be supplied by customer:
One or two monitors
PoE switch
Cables (SDI, Powercon, Ethernet & XLR5)
Information
With this package, you are able to follow three performers with an unlimited amount of fixtures. This set-up includes the Follow-Me Rack Server, which immediately provides the full Follow-Me solution. The Rack Server is only 1U tall and 18 inches deep, making it perfect for use in a wide range of popular racks and rackcases. It includes a Mac Mini with the latest Follow-Me software installed on it.
Attach the Follow-Me Camera Set and the Follow-Me Console Sets, and you're good to start following performers with the Follow-Me SIX license. This license also supports automation integration over PSN and be extended to automatically track performers using the Follow-Me Track-iT system.
Upgrade options
This package is a great long-term solution, as it can be upgraded at all times to follow more performers. As the SIX license already supports up to six performers, all that's needed is extra Follow-Me mouse consoles. If additional parameter control is desired then extra Follow-Me Fader consoles are recommended. Follow-Me consoles will instantly be recognized over Ethernet cable in the Follow-Me software, after which you can follow those extra performers at your show.
Interested in one of these options?
The following options are recommended for your show
Option 6
Recommended
Follow-Me SIX license
The Follow-Me SIX license allows you to follow six performers with an unlimited amount of fixtures. It supports Art-Net and allows you to follow performers in full 3D. This license provides also access to the PosiStageNet protocol and the ability to extend with TraXYZ autotracking.
Follow-Me Camera Set
The Follow-Me Camera Set includes the Follow-Me Camera Box, a Marshall camera and 3 lenses. This is used to provide a camera image into the Follow-Me software for remote follow spot control. The Follow-Me Camera Box is a sturdy case that allows you to keep your camera in the truss. The camera can be easily mounted on top of the camera box, with a 360° ball joint head.
Follow-Me Rack Server
The Follow-Me Rackserver allows you to easily integrate Follow-Me in your server rack. The Follow-Me rackserver is a robust and secure solution that includes a Mac mini with Follow-Me 3D installed on it. A Follow-Me serial adapter and all connectors required for Follow-Me are also integrated, incl. HDMI and SDI to receive the camera feed into Follow-Me and Ethercon to integrate Follow-Me in your lighting infrastructure.
The enclosure is only 1U tall and 18 inches deep, making it perfect for use in a wide range of popular racks and rackcases. A convenient front panel power button turns the Mac Mini on and off. It also includes temperature control fans to prevent the Mac Mini from overheating. A USB 3.0 port on the front of the rackserver enables connection of keyboard and mouse to the Mac Mini. The rack enclosure provides strategic airflow cooling for the included Mac Mini.
Connect the rack server to a monitor and a PoE switch and you’re good to go!
Follow-Me Mouse Console
The Follow-Me Mouse console is a high quality piece of hardware with which one operator can follow one person. It is an ergonomic mouse controller for prolonged shows with proportional control for accurate tracking.
It has two buttons and two encoders that can be assigned to any mapping function within the Follow-Me software. The console has a target selection ID display to identify which target the controller is connected to.
The casing of the Follow-Me mouse console is made from robust metal: especially made durable for those rock and roll shows. The mouse feels nice to control, so that operators are not strained during prolonged shows. Together with the fader console, it is a perfect combination for operating the Follow-Me software.
Follow-Me Fader Console
The Follow-Me Fader Console adds an extra 4 faders, 4 encoders and 4 switches to the Follow-Me Mouse Console. It is a high quality piece of hardware that one Follow-Me operator can use to utilise any mapping in the Follow-Me software. After connecting a fader console to the Follow-Me software, all buttons and faders on the Fader Console can be customized to be attached to any mapping in the software.
The console has a Neutrik XLR-4 output to link to the mouse console. An XLR cable is included with the fader console. There is also a Neutrik XLR-3 available for an optional LED desk light. The Follow-Me Fader Console supports the industry standard Littlite X-LED Series and Littlite XR-LED Series.
To be supplied by customer:
One or two monitors
PoE switch
Cables (SDI, Powercon, Ethernet & XLR5)
Information
With this package, you are able to follow four performers with an unlimited amount of fixtures. This set-up includes the Follow-Me Rack Server, which immediately provides the full Follow-Me solution. The Rack Server is only 1U tall and 18 inches deep, making it perfect for use in a wide range of popular racks and rackcases. It includes a Mac Mini with the latest Follow-Me software installed on it. Attach the Follow-Me Camera Set and the Follow-Me consoles, and you're good to start following performers with the Follow-Me SIX license. This license also supports automation integration over PSN and be extended to automatically track performers using the Follow-Me Track-iT system.
Upgrade options
This package is a great long-term solution, as it can be upgraded at all times to follow more performers. As the SIX license already supports up to six performers, all that's needed is extra Follow-Me mouse consoles. If additional parameter control is desired then extra Follow-Me Fader consoles are recommended. Follow-Me consoles will instantly be recognized over Ethernet cable in the Follow-Me software, after which you can follow those extra performers at your show.
Interested in one of these options?
The following options are recommended for your show
Option 7
Recommended
Follow-Me SIX license
The Follow-Me SIX license allows you to follow six performers with an unlimited amount of fixtures. It supports Art-Net and allows you to follow performers in full 3D. This license provides also access to the PosiStageNet protocol and the ability to extend with TraXYZ autotracking.
Follow-Me Camera Set
The Follow-Me Camera Set includes the Follow-Me Camera Box, a Marshall camera and 3 lenses. This is used to provide a camera image into the Follow-Me software for remote follow spot control. The Follow-Me Camera Box is a sturdy case that allows you to keep your camera in the truss. The camera can be easily mounted on top of the camera box, with a 360° ball joint head.
Follow-Me Rack Server
The Follow-Me Rackserver allows you to easily integrate Follow-Me in your server rack. The Follow-Me rackserver is a robust and secure solution that includes a Mac mini with Follow-Me 3D installed on it. A Follow-Me serial adapter and all connectors required for Follow-Me are also integrated, incl. HDMI and SDI to receive the camera feed into Follow-Me and Ethercon to integrate Follow-Me in your lighting infrastructure.
The enclosure is only 1U tall and 18 inches deep, making it perfect for use in a wide range of popular racks and rackcases. A convenient front panel power button turns the Mac Mini on and off. It also includes temperature control fans to prevent the Mac Mini from overheating. A USB 3.0 port on the front of the rackserver enables connection of keyboard and mouse to the Mac Mini. The rack enclosure provides strategic airflow cooling for the included Mac Mini.
Connect the rack server to a monitor and a PoE switch and you’re good to go!
Follow-Me Mouse Console
The Follow-Me Mouse console is a high quality piece of hardware with which one operator can follow one person. It is an ergonomic mouse controller for prolonged shows with proportional control for accurate tracking.
It has two buttons and two encoders that can be assigned to any mapping function within the Follow-Me software. The console has a target selection ID display to identify which target the controller is connected to.
The casing of the Follow-Me mouse console is made from robust metal: especially made durable for those rock and roll shows. The mouse feels nice to control, so that operators are not strained during prolonged shows. Together with the fader console, it is a perfect combination for operating the Follow-Me software.
Follow-Me Fader Console
The Follow-Me Fader Console adds an extra 4 faders, 4 encoders and 4 switches to the Follow-Me Mouse Console. It is a high quality piece of hardware that one Follow-Me operator can use to utilise any mapping in the Follow-Me software. After connecting a fader console to the Follow-Me software, all buttons and faders on the Fader Console can be customized to be attached to any mapping in the software.
The console has a Neutrik XLR-4 output to link to the mouse console. An XLR cable is included with the fader console. There is also a Neutrik XLR-3 available for an optional LED desk light. The Follow-Me Fader Console supports the industry standard Littlite X-LED Series and Littlite XR-LED Series.
To be supplied by customer:
One or two monitors
PoE switch
Cables (SDI, Powercon, Ethernet & XLR5)
Information
With this package, you are able to follow five performers with an unlimited amount of fixtures. This set-up includes the Follow-Me Rack Server, which immediately provides the full Follow-Me solution. The Rack Server is only 1U tall and 18 inches deep, making it perfect for use in a wide range of popular racks and rackcases. It includes a Mac Mini with the latest Follow-Me software installed on it. Attach the Follow-Me Camera Set and the Follow-Me consoles, and you're good to start following performers with the Follow-Me SIX license. This license also supports automation integration over PSN and be extended to automatically track performers using the Follow-Me Track-iT system.
Upgrade options
This package is a great long-term solution and it can be upgraded at all times to follow more performers. As the SIX license already supports up to six performers, all that's needed is extra Follow-Me mouse consoles. If additional parameter control is desired then extra Follow-Me Fader consoles are recommended. Follow-Me consoles will instantly be recognized over Ethernet cable in the Follow-Me software, after which you can follow those extra performers at your show.
Interested in one of these options?
The following options are recommended for your show
Option 8
Recommended
Follow-Me SIX license
The Follow-Me SIX license allows you to follow six performers with an unlimited amount of fixtures. It supports Art-Net and allows you to follow performers in full 3D. This license provides also access to the PosiStageNet protocol and the ability to extend with TraXYZ autotracking.
Follow-Me Camera Set
The Follow-Me Camera Set includes the Follow-Me Camera Box, a Marshall camera and 3 lenses. This is used to provide a camera image into the Follow-Me software for remote follow spot control. The Follow-Me Camera Box is a sturdy case that allows you to keep your camera in the truss. The camera can be easily mounted on top of the camera box, with a 360° ball joint head.
Follow-Me Rack Server
The Follow-Me Rackserver allows you to easily integrate Follow-Me in your server rack. The Follow-Me rackserver is a robust and secure solution that includes a Mac mini with Follow-Me 3D installed on it. A Follow-Me serial adapter and all connectors required for Follow-Me are also integrated, incl. HDMI and SDI to receive the camera feed into Follow-Me and Ethercon to integrate Follow-Me in your lighting infrastructure.
The enclosure is only 1U tall and 18 inches deep, making it perfect for use in a wide range of popular racks and rackcases. A convenient front panel power button turns the Mac Mini on and off. It also includes temperature control fans to prevent the Mac Mini from overheating. A USB 3.0 port on the front of the rackserver enables connection of keyboard and mouse to the Mac Mini. The rack enclosure provides strategic airflow cooling for the included Mac Mini.
Connect the rack server to a monitor and a PoE switch and you’re good to go!
Follow-Me Mouse Console
The Follow-Me Mouse console is a high quality piece of hardware with which one operator can follow one person. It is an ergonomic mouse controller for prolonged shows with proportional control for accurate tracking.
It has two buttons and two encoders that can be assigned to any mapping function within the Follow-Me software. The console has a target selection ID display to identify which target the controller is connected to.
The casing of the Follow-Me mouse console is made from robust metal: especially made durable for those rock and roll shows. The mouse feels nice to control, so that operators are not strained during prolonged shows. Together with the fader console, it is a perfect combination for operating the Follow-Me software.
Follow-Me Fader Console
The Follow-Me Fader Console adds an extra 4 faders, 4 encoders and 4 switches to the Follow-Me Mouse Console. It is a high quality piece of hardware that one Follow-Me operator can use to utilise any mapping in the Follow-Me software. After connecting a fader console to the Follow-Me software, all buttons and faders on the Fader Console can be customized to be attached to any mapping in the software.
The console has a Neutrik XLR-4 output to link to the mouse console. An XLR cable is included with the fader console. There is also a Neutrik XLR-3 available for an optional LED desk light. The Follow-Me Fader Console supports the industry standard Littlite X-LED Series and Littlite XR-LED Series.
To be supplied by customer:
One or two monitors
PoE switch
Cables (SDI, Powercon, Ethernet & XLR5)
Information
With this package, you are able to follow six performers with an unlimited amount of fixtures. This set-up includes the Follow-Me Rack Server, which immediately provides the full Follow-Me solution. The Rack Server is only 1U tall and 18 inches deep, making it perfect for use in a wide range of popular racks and rackcases. It includes a Mac Mini with the latest Follow-Me software installed on it. Attach the Follow-Me Camera Set and the Follow-Me consoles, and you're good to start following performers with the Follow-Me SIX license. This license also supports automation integration over PSN and be extended to automatically track performers using the Follow-Me Track-iT system.
Upgrade options
This package is a great long-term solution, as you are able to follow six performers with unlimited fixtures. If more than six performers need to be followed, you can still purchase more mouse consoles to follow more performers. However, the operator video window can get quite cluttered with crosshairs, and we thus recommend purchasing a second system.
Interested in one of these options?